495 Series Satin Anodized Drop Ceiling Mount Sliding Door with Fixed Panel and Softbrake



Satin Anodized

Use With

Fixed Panel and Softbrake

Kits Available With or Without Softbrake Braking System for 5/16″ to 1/2″ (8 to 12 mm) Tempered Glass

Can Accommodate Properly Installed Doors Weighing Up to 330 Pounds (150 kg)

Rollers Have Up to 1/4″ (6 mm) of Vertical Adjustment to Aid in Door Alignment After Installation

Track Length is 118″ (3 m)

Use Monolithic Tempered Glass

CRL 490 Series Sliding Door Kits

are available in wall mount, ceiling mount, and drop ceiling mount models, with or without a sidelite, and with or without the “Softbrake” braking system. All come with everything you need except the tempered glass and pull hardware. Kits are available in satin anodized or brushed stainless anodized finishes, with a special order option to clad or powder paint in many architectural finishes. Contact Technical Sales for Commercial Products for kit selection or installation assistance.

Each Kit Contains:

118″ (3m) of CRL4933EXT Dropped Ceiling Top Track Kit

118″ (3m) of CRL3979A Bottom Channel

Glazing Vinyl for 5/16″, 3/8″ or 1/2″ (8, 10, or 12mm) Glass

1 Set CRL4939 Top Hangers

1 Set CRL4942 Roller Stops

1 Each CRL2940 Bottom Guide

1 Set CRL2945 Door Edge Guards

1 Set CRL290TF Top Track Insert Fasteners
One “Softbrake” is required for each direction of travel. Minimum sliding panel width of 30-7/8″ (785 mm) for control in a single direction: 42-1/2″ (1080 mm) for control in both directions. Existing CRL490 Series installations can be easily upgraded by ordering kits.

There are no reviews yet.

Be the first to review “495 Series Satin Anodized Drop Ceiling Mount Sliding Door with Fixed Panel and Softbrake”