Satin Aluminum Clear
Flat Face, Round Corners
6-7/8 In. X 1-1/4 In.
Certifications and Listings
Product Width (in.)
Strikes & Filler Plates Type
Fail-Safe/Fail-Secure: Field convertible from one mode to the other. However, AC intermittent solenoid must not be used continuously in either.
Flat Electric Strike
Case: Approximately 1” x 3-3/8” x 1-5/8” deep.
Designed for Adams Rite Deadlatches or Cylindrical Locksets with 1/2″ to 5/8″ Latch Bolt Projection
Strike Lip: Basic 7100 strike has lip of proper length for 1-3/4” thick door that closes flush with jamb edge. Where door thickness or jamb shape differs from this standard relationship, lip extension kits are available, specified by last dash number. Not available on 7101.
Strike Opening: 5/8” x 1-7/16” x 1/2” deep. Bolt retainer jaw is stainless steel. Strike accepts bolt of any Adams Rite 4500, 4700 (discontinued), or 4900 Deadlatch or cylindrical latches.
For Use In Aluminum Jambs
Warranted Free From Defects In Workmanship And Materials Under Normal Use And Service
Faceplate: Measures 1-1/4” x 4-7/8”. 7100 has flat faceplate; 7101 is radiused to match nose on inactive leaf in a pair of narrow stile glass doors. Available in a wide range of architectural finishes.
Voltage: Available in 12 or 24 volt AC and DC. DC continuous units are silent, AC intermittent units “buzz” on operation.
Flat Faceplate, 24 Volt, AC Intermittent, Standard/Fail Secure, 628 Clear Anodized, Lip Extensions 1-1/16 or less
7100 SeriesElectric Strikes for Adams Rite Deadlatches and Cylindrical Locks
Designed for use with Adams Rite deadlatches or cylindrical locksets with 1/2″ [12.7 mm] to 5/8″ [15.9 mm] latchbolt projection. For use in aluminum, hollow metal, or wood applications.
Remote electrical control of any door equipped with an Adams Rite 4500, 4700 (discontinued), or 4900 Deadlatch or cylindrical lockset with 1/2″ [12.7 mm] to 5/8″ [15.9 mm] latchbolt projection. Electrical actuation unlocks the keeper, releasing the latchbolt so the door may be opened without operating the latch itself.
UL 1034 burglary-resistant listed
UL 294 (6th Edition) listed
1″ x 3-3/8″ x 1-5/8″ deep
[25.4 mm x 85.7 mm x 41.3 mm deep]
5/8″ x 1-7/16″ x 1/2″ deep
[15.9 mm x 36.5 mm x 12.7 mm deep]
Bolt retaining keeper is stainless steel.
Strike accepts bolt of any Adams Rite 4500, 4700 (discontinued), or 4900 Deadlatch or cylindrical latches.
Basic strike has lip of proper length for 1-3/4″ [44.5 mm] thick door that closes flush with jamb edge.
Where door thickness or jamb shape differs from this standard relationship, lip extension kits are available, specified by last dash number.
Lip extension kits not available on 7101 or 7131.