Minimum Order

1 Each

Type

90º Hold Open

Spring Size

A.D.A. – 8.5 Lb.

For Doors with 1/2″ (12.7 mm) Top Rail Depth

Adjustable Side-Load Bottom Pivot Set for Threshold Mounting

Includes All Necessary Parts

5 Year Limited Warranty

UL Listed

These

CRL Overhead Door Closer Kits

consist of a Medium Spring Size Door Closer, Mounting Clips, Type “S” Side-Load Arm, and a “DP” Adjustable Dual-Purpose Bottom Pivot Set or “GE” Bottom Pivot Set. The Door Closer has independent, dual-action valves to control closing and latching speeds. Both 90º and 105º Hold Open and No Hold Open models are available. Door Closer Bodies fit into standard 1-3/4″ x 4″ (44 x 102 mm), or larger, extrusions. Door Closers with different spring sizes or hardware options and Door Closer Bodies with Mounting Clips and Overhead Concealed Door Closer Accessories are available.

Independent Adjustment Valves

Non-Critical valve control adjusts both Closing Speed and Latching Speed independent of each other.

Special Retaining Rings

Prevent the Adjustment Valve Screws from being backed all the way out of the Door Closer Body.

NOTE:

An auxiliary floor or overhead door stop is recommended to prevent possible damage to both the door closer and entry way due to over-extension of maximum allowable door swing.

NOTE:

Although A.D.A. Series Door Closers comply with A.D.A. specified opening forces, they might not provide adequate spring power to control and close the door due to varying site conditions and door size. Important Notes: Closers set to comply with A.D.A. specified opening forces might not provide adequate spring power to control and close the door due to varying site conditions and door size. This Closer is not to be used for doors weighing in excess of 200 Lbs. (91 Kg) or wider than 36″ (914 mm).