90º No Hold Open
A.D.A. – 8.5 Lbs.
“A” Center-Hung End-Load Hardware Package for Doors with 1″ Deep Top Rails
For Doors with 1″ (25 mm) Top Rail Depth
Adjustable Dual-Purpose Bottom Pivot Set for Floor or Threshold Mounting
U.L. Listed with a Five Year Limited Warranty
CRL Overhead Door Closer Kits
consist of a Medium Spring Size Door Closer, Mounting Clips, Type “A” End-Load Arm, and a “DP” Adjustable Dual-Purpose Bottom Pivot Set. The Door Closer has independent, dual-action valves to control closing and latching speeds. Both 90 and 105º Hold Open and No Hold Open models are available. Door Closer Bodies fit into standard 1-3/4″ x 4″ (44 x 102 mm), or larger, extrusions. Door Closers with different spring sizes or hardware options and Door Closer Bodies with Mounting Clips and Overhead Concealed Door Closer Accessories are available.
Independent Adjustment Valves
Non-Critical valve control adjusts both Closing Speed and Latching Speed independent of each other.
Special Retaining Rings
Prevent the Adjustment Valve Screws from being backed all the way out of the Door Closer Body.
An auxiliary floor or overhead door stop is recommended to prevent possible damage to both the door closer and entry way due to over-extension of maximum allowable door swing.
Although A.D.A. Series Door Closers comply with A.D.A. specified opening forces, they might not provide adequate spring power to control and close the door due to varying site conditions and door size. Important Notes: Closers set to comply with A.D.A. specified opening forces might not provide adequate spring power to control and close the door due to varying site conditions and door size. This Closer is not to be used for doors weighing in excess of 200 Lbs. (91 Kg) or wider than 36″ (914 mm).