Base Shoe & TAPER-LOC Kit for 21.52 mm Glass, Dark Bronze Finish

$1.36

Finish

Dark Bronze

Length

118-1/8″

For 27/32″ (21.52 mm) Laminated Tempered Glass (10 x 1.52 x 10 mm)

CRL Glass Railing Systems Meet NBC Load Requirements When Installed in Accordance to ICC-3842

Shoe is Drilled and Counter Bored 11-13/16″ Center-to-Center in Pattern “D” 118-1/8″ Length

Easy to order frameless glass railing system kit includes (1) 9BL21D Base Shoe, (10) XL21LT Adjustable Tapers and (2) lengths of LBSCBS10 cladding for both sides of the base shoe.

Notes: The TAPER-LOC® XAL Setting Base spaces the glass away from the Base Shoe’s vertical walls at the bottom edge, allowing for glass angle adjustment. It also serves to insulate the glass panels from damage during insertion into the Base Shoe and, at the same time, center the glass in the pocket.

PANEL WIDTH and SUGGESTED TAPER-LOC® XAL SETS PER PANEL

1 Set for 6″ to 14″ (152 to 356 mm)

2 Sets for 14″ to 28″ (356 to 711 mm)

3 Sets for 28″ to 42″ (711 to 1067 mm)

4 Sets for 42″ to 56″ (1067 to 1422 mm)

5 Sets for 56″ to 70″ (1422 to 1778 mm)

6 Sets for 70″ to 84″ (1778 to 2134 mm) Important Notes: All pre-drilled CRL Base Shoes have a +1/8 (3 mm)/-1/16 (1.5 mm) tolerance between each hole drilled in the base. Before drilling installation holes in the concrete or steel substrate, it is recommended that the installer place the base shoe into the planned final position, then mark the position of the holes to be drilled into the substrate.

There are no reviews yet.

Be the first to review “Base Shoe & TAPER-LOC Kit for 21.52 mm Glass, Dark Bronze Finish”