Closing Type

No Hold Open

Minimum Order

1 Each

Finish

Chrome

A Great Alternative to Floor Closers and Patch Fittings

Adjustable Closing Speed

Aluminum Body in Your Choice of Three Finishes: Brite Chrome, Brushed Satin, and Satin Anodized

For Self-Closing Glass Doors from 5/16″ to 9/16″ (8 to 13.52 mm) Thick

Hold Open or No Hold Open Models

This

CRL 180 Degree Glass-to-Glass Hinge

swings in and out a full 90 degrees, with stop at 0 degrees. Closing speed can be adjusted. For doors up to 39″ (1 m) wide. Maximum weight per two hinges is 176 lbs. (80 kg).

The Hinge represents the evolution and the synthesis between automatic mechanical hinges and hydraulic door closers. Designed for use on interior doors (not for Shower Doors) leading into the bathroom area, Oil Dynamic allows you to design a self-closing door without the need of a floor-mounted or overhead closing device. This gives you the advantage of being able to install an ‘all-glass’ door in an existing opening without the need for extensive retrofitting of hardware into the floor or overhead.

Properly mounted, two Oil Dynamic hinges will support a 5/16″ to 9/16″ (8 to 13.52 mm) thick glass door up to 39″ (1 m) in width and weighing up to 176 lbs. (80 kg). (Do not use more than two hinges.) A control valve lets you adjust the hinge to the desired closing speed. And Oil Dynamic is ambidextrous, giving you even more design freedom.

This hinge features an aluminum body in distinct configurations for Wall Mount and Glass-to-Glass applications. Oil Dynamic has been subject to strict testing (over 1 million cycles), assuring long lasting service.

SPECIFICATIONS:

Glass Thickness Range: 5/16″ to 9/16″ (8 to 13.52 mm)

Construction: Aluminum

Hinge Swings: 90 Degrees Inwards and Outwards (Except 31M8060 Model, Which Only Swings One Way)

Closing Type: Automatic Closing from 0 to 80 Degrees

Cut-Out Required

Includes: Snap-In Molded Gaskets for 5/16″ to 9/16″ (8 to 13.52 mm) Glass; Hex Screws Maximum Capacities Using Two

Hinges: Door Width: 39″ (1 m); Max Door Weight: 176 lbs. (80 kg)

Important Notes: Do not use more than two hinges on one door. If hinges are to be used for other than their intended purpose, approval must be obtained from the DK Hardware Sales Department. Use only the template included with our hinge. Cut-out dimensions for CRL hinges may not match those of other brands.