Brushed Stainless 1-1/2" Diameter 90 Degree Horizontal Corner for 1/2" or 5/8" Glass Cap Railing

$282.30

Minimum Order

1 Each

L

3-3/4 in (95.3 mm)

Grade

304

Rail Diameter

1-1/2″

Dimensions

L=3-3/4″ (95.3 mm) and C=3″ (76.2 mm)

C

3 in (76.2 mm)

Type

90 Degree Horizontal Corners

Finish

Brushed Stainless

Four Architectural Finishes

Requires Two Connector Sleeves (Not Included)

Welded, Finished, and Ready-to-Install

Interior slip-fit Horizontal Corners for 1/2″ (12 mm) or 5/8″ (16 mm) thick glass allow for hairline joint assemblies with straight lengths of

CRL Cap Rail

. Use of our Cat. No. 32629 Metal Contact Cement is required to achieve a secure and permanent bond. Two Connector Sleeves are required for use with each corner.

Each Horizontal Corner is fabricated, finished, and individually packed. All of our stainless and brass corners are fabricated from CRL Premium Cap Rail, and are welded and finished to match. Standard stainless alloy is 304. Stainless alloy 316 is available on special order. For brass, alloy 260 is standard.

Please contact

DK Hardware Sales

for more information or a quote.

NOTE:

With the exception of the GR15 Series Cap Rail Corners, when used with 1/2″ (12 mm) glass, our GR5PV Cap Rail Vinyl and 95CBL Silicone should be used to secure the glass. When using GR15 Series Cap Rail Corners or 5/8″ (16 mm) glass, use 95CBL Silicone and shims only to secure the glass. Important Notes: When used with 1/2″ (12 mm) glass, our GR5PV Cap Rail Vinyl and 95CBL Silicone should be used to secure the glass. When used with 5/8″ (16 mm) glass, secure with shims and 95CBL Silicone.

There are no reviews yet.

Be the first to review “Brushed Stainless 1-1/2″ Diameter 90 Degree Horizontal Corner for 1/2″ or 5/8″ Glass Cap Railing”