Color

Brushed Stainless

Length

60″ (1524 mm)

Minimum Order

1 Set

Alloy 304 Stainless Steel Tubing

Brushed and Polished Stainless Steel Finishes

For 1/2″ to 3/4″ (12 to 19 mm) Tempered Glass

Four Sizes in Stock, Custom Sizes Available on Special Order

Lock Operates at a Comfortable 42″ (1067 mm) Above the Floor

Uses 7-Pin Interchangeable Cores

Various Latching Options Available

Our

CRL 60″ (1524 mm) Locking Ladder Pulls

have a fully concealed deadbolt locking mechanism that is operated at 42″ (1067 mm) above the floor. No need to bend, simply turn a key or thumbturn located at a comfortable height above the finished floor to lock or unlock your doors. These Locking Ladder Pulls are intended for use with glass doors made from 1/2″ to 3/4″ (12 to 19 mm) thick tempered glass. They lock into the floor only, and are available in brushed stainless steel.

This Locking Ladder Pull is supplied with our standard 7-pin Rim Cylinder with Interchangeable Core, that can be used as the final cylinder or as a temporary, and is easily replaced. If staying with the 7-pin format, just remove the core, have it re-keyed, or replace it with a new one. If proprietary 6-pin Cylinders are required, simply remove the entire Rim Cylinder provided and replace with the proper Rim Cylinder of your choice. This Ladder Pull will accept most standard manufactured Rim type cylinders.

NOTE:

Glass fabrication is required.Important Notes

The Medico cylinder will not work with our standard LLP series ladder pulls. The pivot pin and cylinder spacer must be special ordered and modified by CRL.