Brushed Stainless Bottom Door Patch with 1NT301 Insert

$54.15

Minimum Order

1 Each

Shipping Weight

1 lb (454g)

Finish

Brushed Stainless

Use Monolithic Tempered Glass

2-3/4″ (70 mm) Pivot Setback

For 3/8″ or 1/2″ (10 or 12 mm) Glass

CRL Bottom Gate Patch Fittings

are used with our bottom door pivots or floor closers. It fits in the lower corner of the gate’s glass panel, and requires a hole and cut-out in the glass. Available in brushed stainless steel finish, it comes complete with instructions and a glass cut-out template.

GLASS FABRICATION REQUIRED:

One 3/4″ (19 mm) Diameter

Hole and Corner Notch

COMES WITH:

Template and Instructions Important Notes: These fittings are not for use with Laminated Glass. The following guidelines are to be used when making a 1/2″ glass door using this hardware: Maximum Height: 102″ (2.59 m) Maximum Height: 176 Lbs. (80 kg) Maximum Width: 42″ (1.09 m) If the door exceeds any of these limitations, full door rails should be used.

There are no reviews yet.

Be the first to review “Brushed Stainless Bottom Door Patch with 1NT301 Insert”