Medium Duty 105 Hold Open Overhead Concealed Closer with "A" End-Load Hardware Package

$103.60

Case Qty

6

Closer Body Length

11-5/8 in (295 mm)

Closer Body Width

3-11/16 in (94 mm)

Minimum Order

1 Each

Spring Size

Medium

Type

105º Hold Open

“A” Center-Hung End-Load Hardware Package for Doors with 1″ Deep Top Rails

For Doors with 1″ (25 mm) Top Rail Depth

Adjustable Dual-Purpose Bottom Pivot Set for Floor or Threshold Mounting

U.L. Listed with a Five Year Limited Warranty

These

CRL Overhead Door Closer Kits

consist of a Medium Spring Size Door Closer, Mounting Clips, Type “A” End-Load Arm, and a “DP” Adjustable Dual-Purpose Bottom Pivot Set. The Door Closer has independent, dual-action valves to control closing and latching speeds. Both 90 and 105º Hold Open and No Hold Open models are available. Door Closer Bodies fit into standard 1-3/4″ x 4″ (44 x 102 mm), or larger, extrusions. Door Closers with different spring sizes or hardware options and Door Closer Bodies with Mounting Clips and Overhead Concealed Door Closer Accessories are available.

Independent Adjustment Valves

Non-Critical valve control adjusts both Closing Speed and Latching Speed independent of each other.

Special Retaining Rings

Prevent the Adjustment Valve Screws from being backed all the way out of the Door Closer Body.

NOTE:

An auxiliary floor or overhead door stop is recommended to prevent possible damage to both the door closer and entry way due to over-extension of maximum allowable door swing. Important Notes: This Closer is not to be used for doors weighing in excess of 200 Lbs.

There are no reviews yet.

Be the first to review “Medium Duty 105 Hold Open Overhead Concealed Closer with “A” End-Load Hardware Package”