Mill Finish 1.9" Diameter 90 Degree Horizontal Corner for 1/2" or 5/8" Glass Cap Railing

$219.60

C

3-1/16 in (77.5 mm)

L

4 in (101.6 mm)

Minimum Order

1 Each

Dimensions

L=6″ (152.4 mm) and C=5-1/16″ (128.6 mm)

Grade

6063-T6

Type

90 Degree Horizontal Corners

Finish

Mill

Mitered and Finished

6063-T6 Mill Aluminum Alloy

New Oval Corner in Mill Aluminum

Requires Two Connector Sleeves (Not Included)

CRL Interior Slip-Fit Horizontal Corners

for 1/2″ (12 mm), 9/16″ (13.52 mm) or 5/8″ (16 mm) thick glass allow for hairline joint assemblies with straight lengths of CRL Cap Rail. Use of our Cat. No. 32629 Metal Contact Cement is required to achieve a secure and permanent bond. Two Connector Sleeves are required for use with each corner.

Each Horizontal Corner is fabricated, and individually packed. Our aluminum corners are welded for painted finishes only. The Internal Corner Splices create an architecturally pleasing mitered joint.

Each Horizontal Corner is fabricated, finished, and individually packed. Standard stainless alloy is 304. Stainless alloy 316 is available on special order.

NOTE:

Cat. No. GR5PV Cap Rail Vinyl and 95CBL Silicone should be used to secure 1/2″ (12 mm) glass; Cat. No. LR56PV Cap Rail Rubber Insert and 95CBL should be used to secure 9/16″ (13.52 mm) laminated glass; Cat. No. 95CBL Silicone and shims should be used to secure 5/8″ (16 mm) glass.

Please contact

DK Hardware Sales

for more information or a quote.

There are no reviews yet.

Be the first to review “Mill Finish 1.9″ Diameter 90 Degree Horizontal Corner for 1/2″ or 5/8″ Glass Cap Railing”