Mill Finish 1.9" Extruded Aluminum Cap Rail for 1/2" or 5/8" Glass - 240"

$251.82

Minimum Order

1 Each

Grade

6063-T6

Thickness

.125″ (3.2 mm)

“D” Depth

9/16″ (14.3 mm)

Depth

9/16 in (14.3 mm)

Width

3/4 In (19 mm)

“W” Width

3/4″ (19 mm)

Finish

Mill

Available for 1/2″ or 5/8″ Monolithic Glass (12, or 16 mm) and 9/16″ (13.52 mm) Laminated Glass

Available for 1/2″, 9/16″ or 5/8″ (12, 13.52, or 16 mm) and 3/4″ (19 mm) Glass

Connects to a Variety of Fabricated Corners and End Caps

Custom Shapes and Sizes are Available

Use Sleeve Number GR19CSM

CRL Extruded Aluminum Cap Rails

are extruded from alloy 6063-T6, which is suitable for custom finishes such as anodizing, powder coating, etc. Use of our 32629 Metal Contact Cement is required to achieve a secure and permanent bond at all connections. Use Connector Sleeves to connect Cap Rails.

Please contact

DK Hardware Sales

for more information or a quote.

NOTE:

Cat. No. GR5PV Cap Rail Vinyl and 95CBL Silicone should be used to secure 1/2″ (12 mm) glass; Cat. No. LR56PV Cap Rail Rubber Insert and 95CBL should be used to secure 9/16″ (13.52 mm) laminated glass; Cat. No. 95CBL Silicone and shims should be used to secure 5/8″ (16 mm) glass.

This dimension is used to calculate the glass size. Add the clearance you desire or allow an additional 1/8″ (3.2 mm) if using Cap Rail Vinyl.

There are no reviews yet.

Be the first to review “Mill Finish 1.9″ Extruded Aluminum Cap Rail for 1/2″ or 5/8″ Glass – 240″”