Model PH27 8.5 Lb. Offset 90 Degree Selective Hold Open Floor Mounted Closer Body Only - Left Hand

$0.97

Minimum Order

1 Each

Handing

Left Hand

Type

90 Degree Selective Hold Open

Brand

Rixson

Built-in Positive Dead Stop

For Exterior or Interior Doors Weighing Up to 450 Lbs. (204 kg) and 48″ (1.22 m) Wide

Selective On or Off Hold Open

This

Rixson® Model 27 Offset Floor Mounted Door Closer

provides the best mechanical means of controlling a door. The weight of the door is supported by the bottom arm, which is directly connected to the floor closer spindle. The direct connection between the bottom arm and the floor closer spindle creates a tremendous increase in closing efficiency compared to surface or overhead concealed closers. This closer is capable of supporting exterior or interior doors weighing up to 450 lbs. (204 kg) and 48″ (1.22 m) Wide.

Standard features include selective on or off hold open, build-in positive dead stop, and separate independent valves for closing, latch and backcheck adjustments.

NOTE:

CRL is a stocking Rixson® Specialty Door Control Distributor. If you need Rixson® products please contact our Technical Sales Department for assistance.

NOTE:

Although A.D.A. Series Door Closers comply with A.D.A. specified opening forces, they might not provide adequate spring power to control and close the door due to varying site conditions and door size.

Optional accessories that may be needed:

253000

Floor Closer Cement Case

274750LH

Closer Cover

252050LH

Bottom Offset Arm

R180

Top Offset Pivot

M19LH

Intermediate Offset Pivots

.

Additional finishes and accessories are available upon request for quotation.

Important Notes: Closers set to comply with A.D.A. specified opening forces might not provide adequate spring power to control and close the door due to varying site conditions and door size.

There are no reviews yet.

Be the first to review “Model PH27 8.5 Lb. Offset 90 Degree Selective Hold Open Floor Mounted Closer Body Only – Left Hand”