4″ (102 mm)
3/8″ (10 mm)
90 Degree Vertical Corners
Ready to Install
Requires Two Connector Sleeves (Not Included)
Several Architectural Finishes
CRL Interior slip-fit Vertical Corner
is for 21.52 or 25.52 mm thick laminated glass which allows for hairline joint assemblies with straight lengths of CRL Cap Rail. Use of our
32629 Metal Contact Cement
is required to achieve a secure and permanent bond. Two Connector Sleeves are required for use with each Corner.
Each Vertical Corner is fabricated, finished, and individually packed. All of our stainless and brass corners are fabricated from CRL Premium Cap Rail and are welded
and finished to match. Our aluminum corners are welded for painted finishes only. All anodized finishes utilize a custom fabricated internal splice that creates an architecturally pleasing mitered joint. Standard stainless alloy is 304. Stainless alloy 316 is available on special order. For more information contact CRL Railing Products Technical Sales Department.
When used with 21.52 mm laminated glass, our
LR21PV Cap Rail Rubber Insert
should be used to secure the glass. When used with 25.52 mm glass, secure with
LR22PV Cap Rail Rubber Insert and
. Important Notes: Dimension is used to calculate the glass size. Add the clearance you desire or add an additional 1/8″ (3.2 mm) if using Cap Rail Vinyl.