Polished Stainless 90 Degree Horizontal Corner for 1-1/2" Square Glass Cap Railing


Dimension C

3 in (76.2 mm)

Dimension L

3-3/4 in (95.3 mm)

Minimum Order

1 Each


L= 3-3/4″ (95.3 mm) and C= 3″ (76.2 mm)




90 Degree Horizontal Corners


Polished Stainless

New Square Profile


Requires Two Connector Sleeves (Not Included)

Two Finishes Available

Welded and Finished

CRL Interior Slip-Fit Horizontal Corners

for 1/2″ (12 mm) to 5/8″ (16 mm) thick glass allow for hairline joint assemblies with straight lengths of CRL Square Cap Rail. Use of our Cat. No. 32629 Metal Contact Cement is required to achieve a secure and permanent bond. Two Connector Sleeves are required for use with each corner.

Each Horizontal Corner is fabricated, finished, and individually packed. All of our stainless corners are fabricated from CRL Premium Cap Rail, and are welded and finished to match. Standard stainless alloy is 304. Stainless alloy 316 is available on special order. Please contact DK Hardware Sales Department for more information or a quote.


With the exception of the GRS15 Series Cap Rail Corners, when used with 1/2″ (12 mm) glass, our GR5PV Cap Rail Vinyl and 95CBL Silicone should be used to secure the glass. When using GRS15 Series Cap Rail Corners with 5/8″ (16 mm) glass, use 95CBL Silicone and shims only to secure the glass.

There are no reviews yet.

Be the first to review “Polished Stainless 90 Degree Horizontal Corner for 1-1/2″ Square Glass Cap Railing”